How to Install a Desk Divider

Desk Divider Installation Guide

Preparation

Clear and clean the desk surface.
Unpack your desk screen(s) and clamp components safely.
Decide where on the desk you want the divider(s) to sit — typically at the back edge for partitioning individual workspaces.

Method 1: Drill-Through Clamps (Permanent Fix)
(Best for long-term installation)

1.Lay out the screen & clamps. Place the screen upside down on the desk. Insert the pins into holes at the base so you can mark drill points.

2. Mark where to drill by pressing the screen down so the pins mark the desk surface at clamp positions, remove screen.

3. Drill holes making sure to keep the drill straight to ensure proper alignment of the screen and drill through the desk at the marked points.

4. Insert the clamps from under the desk’s top. Add washers and tighten bolts until flush using a 17 mm spanner to secure them.

5. Mount the screen by remove the pins from the screen and position the screen onto the fixed clamps. Ensure it’s firmly seated.

Method 2: Easy-Fix Clamps (No Drilling)
(Ideal for adjustable or rented spaces)

1.Lay the screen flat on the desk and slide each easy-fix clamp into the holes at the panel base.

2. Move the screen to your chosen edge of the desk, ensuring it’s flush and level.

3. Fit the clamp by pressing the clamp against the underside of the desktop. Adjust to desk thickness and tighten the clamp using the supplied Allen key until secure.

Tips for Best Results

Measure desk thickness before choosing clamp type or size — easy-fix clamps come in sizes for different thickness ranges.
Drill only where intended, and wear protective gear if using power tools.
For future reconfiguration, easy-fix clamps are quicker to remove and reposition.
Once installed, you can wipe clean around screens — many are designed for easy cleaning.